포스트 텐션 플랫 플레이트 외부 접합부의 내진 거동

초록

An experimental study was conducted to investigate seismic behaviour of post-tensioned (PT) exterior slab-column connections used for the purpose to resist gravity loads only. For these. 23-scale, two PT post-tensioned exterior connections with two different tendon arrangement patterns and one conventional reinforced concrete (RC) exterior connection was tested under quasi static, uni directional reversed cyclic loading. During the lateral testing, gravity forces transferred to the column were kept constant to closely simulate a moment to shear ratio of a real building, One of the objectives of this study was to assess the necessity and/or the quantity of bottom bonded reinforcement needed to resist moment reversal which would occur under significant inelastic deformations of the adjacent lateral force resisting systems. The ACI 318 and 352 provisions for structural integrity were applied to provide the bottom reinforcement passing through the column for the specimens. Prior test results were also collected to conduct comparative studies for some design parameters such as the tendon arrangement pattern, the effect of post-tensioning forces and the use of bottom bonded reinforcement. Consequently, the impact of tendon arrangement on the seismic performance of the PT connection, that is lateral drift capacity and ductility, dissipated energy and failure mechanism. was considerable. Moreover, test results showed that the amount of bottom reinforcement specified by ACI 352. 1R-89 was sufficient for resisting positive moments arising from moment reversal under reversed cyclic loads. Shear strength of the tested specimens was more accurately predicted by the shear strength equation (ACI 318) considering the average compressive stress over the concrete e due to post-tensioning forces than that without considering

키워드