High-gain mixer using cascode current bleeding and g(m)-boosting techniques

Citations

WEB OF SCIENCE

4
Citations

SCOPUS

5

초록

This paper presents a high-gain down-conversion mixer using a cascode current bleeding technique and a transconductance (g(m))-boosting technique. Unlike the conventional folded-type mixer, an nMOS input transconductance transistor is allocated under pMOS switching transistors and load resistors in the proposed mixer. This topology allows the folded mixer to reuse the total current at the input transconductance transistor for low power consumption and to adopt the current bleeding technique for high gain. In addition, the g(m)-boosting technique increases effective transconductance by adding a positive-feedback inductor. Measured results show a maximum voltage conversion gain of 23.8 dB, an input third-order intercept point (IIP3) of -10.5 dBm at the maximum gain, a minimum noise figure of 4.3 dB, and a 3-dB bandwidth from 7.2 to 8.4 GHz with a consumption of 3.9 mW from a 1.2 V supply. The chip size, including test pads, is 0.9 x 0.95 mm(2) using 0.13 m RF CMOS technology.

키워드

cascadecurrent bleedingcurrent reusegm boostingNOISECMOSBAND
제목
High-gain mixer using cascode current bleeding and g(m)-boosting techniques
저자
Lee, Ji-YoungYun, Tae-Yeoul
DOI
10.1002/mop.30215
발행일
2017-01
유형
Article
저널명
Microwave and Optical Technology Letters
59
1
페이지
1 ~ 6