An all-Textile antenna with EBG structure for on-body communication

  • Tak, Jinpil
  • Choi, Jaehoon
Citations

SCOPUS

3

초록

In this paper, an all-Textile antenna with EBG structure for on-body communication is proposed. The proposed antenna consists of center-fed circular patch to generate TM01 mode wave and EBG structure around the patch to guide TM01 wave along the horizontal surface (θ = 90°). The EBG structure acts as an inductively reactive surface to support TM01 mode wave along the body surface. The proposed antenna is designed by using textile materials (conductive textile, conductive thread, and leather substrate) and has monopole-like radiation enhanced along the surface direction in 5.8 ISM GHz band. The proposed antenna has a radius of 50 mm (0.96 λ0 at 5.8 GHz) and a thickness of 3 mm (0.058 λ0 at 5.8 GHz). The antenna gain on the phantom surface (θ = 90°) is improved by 3.3 dB from-5.38 dBi without EBG ground to-2.08 dBi with EBG ground. The peak gain direction is increased from 30° to 75° and near broadside gain is suppressed about 9.6 dB (θ = 30°).

키워드

all-Textilemonopole-like radiationsurface wavewireless body area network (WBAN)AntennasConductive materialsMicrostrip antennasMicrowave antennasMonopole antennasNetworks (circuits)Slot antennasSurface wavesTextilesWireless networksConductive textilesConductive threadsHorizontal surfacesPhantom surfaceReactive surfacesTextile antennasTextile materialsWireless body area networkWearable antennas
제목
An all-Textile antenna with EBG structure for on-body communication
저자
Tak, JinpilChoi, Jaehoon
DOI
10.1109/IWAT.2015.7365351
발행일
2015-03
유형
Conference Paper
저널명
2015 International Workshop on Antenna Technology, iWAT 2015
페이지
30 ~ 33