Effect of a thermally evaporated bis (2-methyl-8-quninolinato)-4-phenylphenolate cathode buffer layer on the performance of polymer photovoltaic cells

초록

We investigated the device characteristics of polymer photovoltaic (PV) cells based on a poly(3-hexylthiophene) (P3HT) and [6,6]-phenylC61 butyric acid methyl ester (PCBM) bulk heterojunction with a cathode buffer layer of thermally evaporated bis (2-methyl-8-quninolinato)-4-phenylphenolate (BAlq). A power conversion efficiency (PCE) of 2.46% was obtained with the insertion of a 4-nm-thick BAlq, which was similar to 118% increase over that for the cell without a BAlq layer, under Air Mass 1.5 Global (AM 1.5 G) illumination, 100 mW/cm(2). Moreover, we examined the charge carrier transport property, and found that the hole mobility of the cell was enhancement due to the insertion of a BAlq layer with a thickness of less than 4 nm, which accounted for the improved in the photocurrent and fill factor (FF) due to the better balance of charge carriers. Finally, the BAlq buffer layer was also demonstrated as an optical spacer that improved the optical absorption of the P3HT:PCBM layer, which accounted for the J (sc) enhancement of the device.

키워드