상세 보기
미립화 및 분무장치 1 : 이류체 노즐의 분무미립화 개선을 위한 형상 최적화
Atomization and Injection System 1 : Geometric optimization for improvement of spray atomization of a twin-fluid nozzle
- 강종빈;
- 박준규;
- 박성욱
초록
Phase Doppler Particle Analyzer (PDPA) was used to measure the size and velocity of droplets, and an ICCD camera and Nd:YAG laser was used to capture the sprayed cross section. Deionized water (DIW) and N2 gas were supplied to an external mixing twin-fluid nozzle with the flow rate of 45cc/min and 50LPM each. The geometry of twin-fluid nozzle varies four types such as DIW hole size, N2 gas outlet angle, N2 gas outlet shape, and group-hole nozzle. As the result, SMD depends on DIW hole diameter because of the gap between DIW outlet and N2 outlet. N2 gas outlet angle and shape affect velocity of droplets.
키워드
Twin-fluid nozzle[이류체 노즐]; SMD; Phase Doppler Particle Analyzer(PDPA); ICCD camera[ICCD 카메라]
- 제목
- 미립화 및 분무장치 1 : 이류체 노즐의 분무미립화 개선을 위한 형상 최적화
- 제목 (타언어)
- Atomization and Injection System 1 : Geometric optimization for improvement of spray atomization of a twin-fluid nozzle
- 저자
- 강종빈; 박준규; 박성욱
- 발행일
- 2015-09
- 유형
- Proceeding
- 저널명
- 한국액체미립화학회 학술발표논문집
- 페이지
- 70 ~ 71