시멘트 킬른 더스트 혼입률에 따른 초속경 섬유보강 콘크리트의 인장성능에 관한 연구

Tensile Performance Analysis of Ultra-Rapid-Hardening Fiber-Reinforced Concrete Based on Cement Kiln Dust Content
  • 전부기
  • 신원식
  • 장윤식
  • 류두열

초록

In this study, the effects of cement kiln dust and silica fume on the tensile performance of fiber-reinforced concrete mixtures comprising special materials and polyethylene fiber for the reinforcement of facilities were analyzed. For the purpose of repair, ultra-rapid-hardening cement with high C3A content was employed, and the cement was replaced with supplementary cementitious materials such as granulated ground blast furnace slag, limestone powder, cement kiln dust, and silica fume. Cement kiln dust was incorporated at 10%, 15%, 20%, 30%, 40%, and 50% weight of cement, and silica fume was incorporated at 20% and 40% weight of cement. Four hours after specimen fabrication, a direct tensile test was conducted. The obtained experimental results indicate that the tensile performance (including tensile strength, strain capacity, and energy dissipation capacity) is found to be significantly high when the content of silica fume is 20% and that of cement kiln dust is 15%.

키워드

Fiber-reinforced ConcreteTensile PerformanceCement Kiln DustSilica FumeEarly Strength섬유보강 콘크리트인장성능시멘트 킬른 더스트실리카흄조기강도
제목
시멘트 킬른 더스트 혼입률에 따른 초속경 섬유보강 콘크리트의 인장성능에 관한 연구
제목 (타언어)
Tensile Performance Analysis of Ultra-Rapid-Hardening Fiber-Reinforced Concrete Based on Cement Kiln Dust Content
저자
전부기신원식장윤식류두열
DOI
10.9798/KOSHAM.2020.20.5.217
발행일
2020-10
저널명
한국방재학회논문집
20
5
페이지
217 ~ 223

파일 다운로드