Numerical and experimental investigation on thermal expansion of UO₂-5 vol% Mo microcell pellet for qualitative comparison to UO₂ pellet

Citations

WEB OF SCIENCE

9
Citations

SCOPUS

15

초록

Thermally conductive microcell UO₂ pellets in which metallic networks enclose UO₂ granules have been highlighted due to their enhanced thermal performance for a potential candidate of accident-tolerant fuels. However, studies on thermal expansion effects of microcell UO₂ pellets are still lacking. Here, stress and strain distributions of the fabricated UO₂-5 vol% Mo microcell pellet under thermal expansion were investigated. After we confirmed that the numerical results agreed well with experimental measurement in terms of linear thermal expansion, stress and strain distributions of the microcell pellets were calculated under maximum stress and maximum strain conditions. As a result, formation of Mo network decreases the maximum hoop stress and the maximum radial strain of UO₂ pellets by 50.9% and by 29.4%, respectively under a linear heat generation rate of 200 W/cm. Finally, the UO₂-5 vol% Mo microcell pellet can decrease the maximum cladding stresses by 36.7%. (C) 2019 Elsevier B.V. All rights reserved.

키워드

Microcell pellet; Nuclear fuel pellet; Accident tolerant fuel; Thermal expansion; Thermal stress; UO2; Molybdenum; LIGHT-WATER; FUEL; CONDUCTIVITY; FABRICATION; MOLYBDENUM; SIMULATION; POROSITY; DEFORMATION; TEMPERATURE; DEPENDENCE
제목
Numerical and experimental investigation on thermal expansion of UO₂-5 vol% Mo microcell pellet for qualitative comparison to UO₂ pellet
저자
Lee, Heung Soo; Kim, Dong-Joo; Yang, Jae Ho; Kim, Dong Rip
DOI
10.1016/j.jnucmat.2019.03.003
발행일
2019-05
유형
Article
저널명
Journal of Nuclear Materials
권
518
페이지
342 ~ 349