Enhanced thermal performance of phase change material-integrated fin-type heat sinks for high power electronics cooling

초록

We report the enhanced cooling performance of the phase change material (PCM)-integrated fin-type heat sink compared to conventional fin-type heat sink in high power electronics with two localized hot spots. The PCM-integrated fin-type heat sink is fabricated by embedding the phase change composite to the base plate of the heat sink. As an effort to effectively utilize thermal capacitive effects of PCM, the phase change composites with paraffin infiltrated to copper foams are deployed within circular hole arrays in the base plate, which is subsequently covered by a graphite sheet, to achieve excellent heat spreading characteristics. Considering the cooling environments of commercial high power electronics (insulated-gate bipolar transistor (IGBT)), thermal performance of the PCM-integrated and the conventional fin-type heat sinks is experimentally and numerically investigated upon the heating powers of 400∼800 W. While the PCM-integrated fin-type heat sinks have similar heat sink thermal resistance with the conventional fin-type heat sinks, the PCM-integrated fin-type heat sinks exhibit an effective time delay up to ∼27.3% of the hot-spot temperature rise until 80 ℃ of the heat sinks in reduced cooling conditions, showing the potential as an effective thermal managing platform of the PCM-integrated heat sinks in convection-limited cooling environments.

키워드