Li-ion Spent Carbon-Loaded Magnesium-Zirconium Hydroxide Composite for Adsorption of Methylene Blue: Kinetics and Isotherm Modelling

초록

The primary aim of the present investigation is to understand the efficiency of mesoporous graphene oxide incorporating Mg/Zr-hydroxide for the adsorption of methylene blue dye. Carbon from used Li-ion batteries was used to make graphene oxide, which is a way to reuse spent carbon that is safe for the environment. The structural and morphological features of the adsorbent were analysed in detail. The prepared adsorbents showed a specific surface area of 237.8 m(2)/g and 364.7 m(2)/g, respectively, for Mg/Zr-hydroxide (MZ) and graphene oxide-doped Mg/Zr-hydroxide (MZC). Raman's studies confirmed that the conversion of graphitic carbon into graphene oxide correlated to a change in the ratio of peak area of D-band and G-band (ID/IG) value from 0.65 to 1.21. The investigation comprised batch adsorption experiments under diverse experimental conditions like varied dye concentrations (10, 20, and 30 mg/L), pH (2-8), temperature (30-50 degrees C), and 90 min of adsorption studied with the adsorbent load of 20 mg. The cumulative effects of dye concentration, adsorbent load, and pH were evaluated. The dye adsorption achieved was 165.56 mg/g and 177.61 mg/g for MZ and MZC, respectively. Incorporation follows pseudo-second-order kinetics (R-2 = 0.99) and the Freundlich isotherm model was found to be the best fit. The composites showed competitive regeneration capacity, proving that these composites are robust adsorbents for the removal of dye contamination in water.

키워드