Two-step flash light sintering process for enhanced adhesion between copper complex ion/silane ink and a flexible substrate

초록

A copper complex ion ink (including copper nanoparticles, a copper precursor and a silane coupling agent) was synthesized to enhance the adhesion between the copper pattern and a polyimide (PI) substrate. Oxygen plasma treatment was performed on the polyimide substrate to initiate a chemical reaction between the complex ion ink and the polyimide. Then, a two-step flash light sintering method (consisting of preheating and main sintering) was used to sinter the copper complex ion ink. The copper complex ion patterns were characterized as a function of the weight fraction of silane coupling agent using scanning electron microscopy (SEM), a four-point probe method and adhesion testing. In addition, a bending fatigue test was performed to evaluate the reliability of the conductive copper pattern under cyclic bending. The copper pattern fabricated with copper complex ion ink containing 3 wt% silane coupling agent exhibited the highest adhesion level (5B), the lowest resistivity (7.6 μΩ·cm) and a low resistance change (18%) after the bending fatigue test. The two-step sintering method used to enhance the adhesion between the copper complex ion ink and polyimide substrate was also studied using X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FT-IR).

키워드