Metal injection molding of W-Cu powders prepared by low energy ball milling

초록

Low energy ball milled W/Cu powders were used for metal injection molding (MIM) in order to overcome the low powder volume fraction of MIM pails after debinding as well as the inherently poor sinterability of the W-Cu powder compacts. Ball milling was carried out Using commercial fine W and Cu powders to form a powder mixture suitable for injection molding. W powders showed no change in either size or shape during the milling process, but the ductile Cu powders were easily deformed to a three-dimensional equiaxed shape, having a particle size comparable to that of W powders. This modification of powder characteristics by ball milling resulted in all improvement of the solid loading of roughly 58 %, maintaining a high and Uniform powder packing density in the feedstock. The densification behavior of W-Cu MIM pails is also discussed on the basis of the relationship between Cu composition and W particle size.

키워드